Product Overview
This forklift wheel cleaning brush is an angled lath brush used as a replaceable component inside industrial wheel cleaning mats. Multiple brush strips are arranged beneath or between the load-bearing grid sections to create the active cleaning surface.
The brush body and tuft holes are formed so that the bristles project at an angle rather than vertically. As a forklift, pallet truck or other wheeled vehicle crosses the mat, the tyres press against and deflect the inclined bristles. The bristles contact the tread and side areas accessible through the grid, helping dislodge dust and loose debris carried on the wheels.
Forklift Wheel Cleaning Brush Mechanism
The cleaning action is produced by the interaction between the angled bristles, the load-bearing grid and the moving wheel. The grid supports the vehicle load while allowing the tyre surface to reach the brush tufts positioned between its openings.
The process occurs in three stages:
- Initial Contact: The tyre enters the mat and contacts the exposed ends of the inclined bristles.
- Bristle Deflection: Wheel pressure bends the angled tufts while the tyre continues to rotate and move across the grid.
- Recovery and Repeated Contact: After the load passes, the bristles recover and the next rows contact another section of the tyre tread.
Product Features
- Angled ABS Brush Body: The forklift wheel cleaning brush uses a rigid plastic body that positions the tuft holes at the required angle and supports each strip inside the mat assembly.
- Inclined Polymer Bristles: Stiff bristle tufts project diagonally so they can deflect under wheel contact rather than receiving the load only at their tips.
- Modular Strip Construction: Multiple lath brushes are arranged across the cleaning mat. Individual worn or damaged strips can be replaced separately.
- Compatible with Load-Bearing Grids: The brushes operate beneath or between grid openings while the surrounding structure supports the vehicle load.
- Made to Match Existing Systems: Brush length, body profile, tuft position and bristle specification can be produced according to a drawing, sample or existing wheel-cleaning mat.
Specifications
| Specification | Standard Configuration |
|---|---|
| Product Type | Angled lath brush |
| Primary Use | Forklift and industrial wheel cleaning mats |
| Brush Construction | Staple-set bristle tufts in a rigid plastic body |
| Body Material | ABS plastic |
| Bristle Material | Stiff polymer filament |
| Bristle Orientation | Inclined |
| Installation | Mounted beneath or between load-bearing grid sections |
| Assembly Structure | Multiple replaceable brush strips across the mat |
| Compatible Traffic | Forklifts, pallet trucks and other wheeled handling equipment |
| Cleaning Function | Removal of dust, dirt and loose debris from wheels |
| Customization Basis | Existing brush sample, technical drawing or mat dimensions |
| Customizable Items | Brush length, body profile, tuft arrangement and bristle specification |
Factory and Warehouse Applications
Forklift wheel cleaning mats are installed at controlled traffic points where wheeled equipment moves from loading, storage or outdoor areas into cleaner production spaces. Angled lath brushes inside the mat contact the tyres during passage and help reduce the transfer of loose dry debris beyond the entrance.
Typical application areas include:
- Factory loading and unloading routes
- Warehouse-to-production transitions
- Internal forklift traffic lanes
- Material handling entrances
- Packaging and assembly areas
- Food and pharmaceutical support areas where the cleaning arrangement has been approved for the site requirements
Installation Location and Brush Maintenance
Install the wheel cleaning mat across a defined vehicle route with sufficient approach and exit space. Removed debris should be cleared from between or beneath the brush strips, and individual brushes should be replaced if the filaments, ABS body or mounting structure become damaged.
Frequently Asked Questions
Why are the bristles installed at an angle?
Inclined bristles deflect as a wheel passes over the mat, creating brushing contact with the tyre tread while allowing the wheel to continue moving across the grid.
What materials are used in the angled lath brush?
The brush uses stiff polymer bristles secured in a rigid ABS plastic body.
Can forklift wheel cleaning brush strips be replaced individually?
Yes. The mat is assembled from multiple lath brushes, so worn or damaged strips can be replaced without replacing the complete cleaning mat.
What information is required for a replacement brush?
Please provide an existing sample or a drawing showing the brush length, ABS body profile, bristle angle, tuft positions and exposed bristle height.
